MyAngel24™ is Everywhere (accessible via Internet) Functional, Secure, Independent, Intelligent, Easy... Much more than Customer Service.
The chamber remains continuously connected to the system via GPRS (or LAN). The Angelantoni Server will continuously record all operating parameters of the equipment.
The user can remotely control the chamber by WEB interface in the same way as by the operative panel installed on the chamber, but having all the internet advantages and additional PC functions compared to an operative multifunction panel.
The user can also download in Excel format the data of cycle running or executed.
Remote Controlled Parameters from Angelantoni Server
Temperature and humidity measured in the test chamber
Set point temperature and relative humidity
Suction and discharge pressure of the compressors
Body temperature compressors
PID parameter adjustment
Digital and analog inputs
Inlet temperature and outlet water / air condenser
Functions Managed and Controlled by the Remote Monitoring Service
Management of the inputs and outputs of the PLC with the possibility to force the state of the same
Number of cycles of all the solenoid valves and all the relays
Number of hours of compressors running
Functions Managed and Controlled by the User from Remote Location
Start and stop chamber
Total management of the equipment in manual and automatic operation
Start delayed cycle
Automatic recording of variables, download in Excel format
It contributes significantly to the understanding of the problems due to a continuous interaction between the operator and the chamber.
It allows to identify the faulty component by examining the recorded data and tests conducted by remote.
It ensures the safety of the solution of the technical problem in a single intervention because the technician knows and has available the defective component.
It substantially contributes to the reduction of downtime.
It avoids technician visits for troubleshooting.
It ensures the solution of all problems relative to the management of the tests and the correct set up of the cycle that must be executed.
It allows the optimization of PID control parameters for temperature and relative humidity according to the test and to the internal load in the test space and to the technical specifications of the chamber.
It allows the optimization of preventive maintenance based on the real running of the components of the refrigeration and electrical systems avoiding expensive downtime prior agreement with the customer.
It enables to effect changes to the PLC programs to optimize the function of the chamber according to specific requirements.
It allows to upgrade of the control system and other updates without any technical intervention on-site.
It helps to avoid technical interventions in 50% of cases.
It allows you to perform technical interventions before the downtime for 80% of cases.