Features
Use of ecological refrigerants such as R404a R134a R23.
Humidification system supplied by mains water. Double dry steam generator to prevent condensation onto specimens.
PLC based control and management system with RS232/RS422 or RS485 serial outputs.
De-humidification system operating down to -20°C dew point.
Heated inspection hole: a fully-transparent heating film allows clear vision of the test compartment from the outside and prevents condensation from forming onto the glass.
Network connection of several chambers to a single master control unit allowing centralized supervision both in local and remote mode.
|
|
Energy Saving The Challenge E series have basic environmental performances and require simple utilities connection. They are intended for general applications when high environmental performances are not required. An ideal tool for tropical tests or pharmaceutical products (stability tests) plastics, rubber, paper, semiconductor (85/85).
Environmental Screening VersionThe Challenge ES series have superior environmental performances.
They are intended for Environmental Stress Screening (ESS) or generally in the reliability growth processes where a 5°C/min is a must.
The chambers are equipped with water condenser (remote air condenser as option).
Bench-Top The Challenge Bench-top are the smaller size of the CH series. They have the same superior performance of the bigger sisters and keep the same electrical and SW interface in order to be integrated very easily with other ACS chambers through the WinKratos SW and the remote PC.
They are intended for Environmental Test of small specimen and can be positioned on the laboratory bench or on the dedicated table provided optionally.
|
